Maintenance
Filters
Figure 1
Then clean the motor protection
filter: open the cover on the
bottom (Figure 1) and remove
the HEPA 13 filter (Figure 2). As
maintenance, you can shake it
outside to remove any small dust
particles that could accumulate.
Clean the protection filter with
clean water (Figure 3).
NOTE:
•
The HEPA filter cannot be cleaned, otherwise it would become damaged. If the
HEPA filter is damaged, you are recommended to replace it to ensure that your
vacuum's filter performance is maintained.
•
The protection filter must be dry before reuse.
Figure 2
Figure 3
13
EN