Manutenzione; Product Identification - CAMPAGNOLA ICARUS Manuel D'utilisation Et D'entretien

2.4

Manutenzione

WARNING!
Before performing any maintenance operations or adjustments of the mechanical parts of the equipment, wear
protective shoes, gloves and goggles.
Routine maintenance and repairs can be carried out only by an operator with the necessary physical and intellectual
•
qualifications.
Special maintenance and repairs can be carried out only by a qualified operator.
•
• Before any maintenance or adjustment operations, disconnect the tool from its power source.
• Keep bystanders away when servicing or repairing the machine.
• Only qualified operators are authorised to inactivate the safety devices provided on the machine when maintenance
is to be performed. It is their responsibility to safeguard the operators and the machine. The safety devices should be
activated as soon as maintenance work has been completed.
• All maintenance procedures not dealt with in this manual are to be performed at Authorised Service Points.
• When maintenance or repairs have been completed, the machine can be started again only if duly authorised by the
qualified operators. The service mechanic must make sure:
- work has been completed;
- the machine runs in a trouble-free manner;
- the safety devices are activated;
- no one is working on the machine.
3.1

Product identification

A identification plate / label is applied to each machine / tool (Picture 1).
Model, serial number and year of manufacture are shown on the Manufacturer's plate. The plate is applied on the
machine / tool and shows the following data and symbols:
1) Company name and full address of the Manufacturer / Constructor.
2) Mandatory prescription for all personnel being responsible for the use and / or maintenance of the machine / tool
as per the corresponding use and maintenance manual.
3) Machine / tool designation.
4) Type of machine / tool - Designation of the type / code of the machine / tool.
5) Year of construction, i.e. the year in which the manufacturing process was completed.
IMPORTANT!
For a correct and clear identification of the tool, reference must be made to type, serial number and year of construction
shown on the identification plate. Mention them to Campagnola Srl for any request for intervention or assistance.
IMPORTANT!
The customer is responsible for verifying the integrity of the plate / label.
The user is required to replace the plate and / or the warning plates which, due to wear, have become illegible.
It is absolutely forbidden to remove the plates / labels from the machine /
tool. Campagnola S.r.l. declines all responsibility for the safety of the ma-
chine / tool if this prohibition is neglected.
Use and maintenance manual – Translation of
original Instruction Rev.: 01, Date 24/09/2021
Picture 1
Pag. 19