Technical Specifications - Vogue GD232 Mode D'emploi

Troubleshooting
If your VOGUE appliance develops a fault, please check the following table before making a call to the
Helpline.
Fault
The unit is not The unit is not switched on
working
Plug and lead are damaged
Power supply
Internal wiring fault
The knife is not Insufficient pressure applied to the knife
sharpening
Sharpening wheels are worn

Technical Specifications

Model
GD232
100-240V~, 50/60Hz
Compliance
The WEEE logo on this product or its documentation indicates that the product must not
be disposed of as household waste. To help prevent possible harm to human health and/or
the environment, the product must be disposed of in an approved and environmentally safe
recycling process. For further information on how to dispose of this product correctly, contact
the product supplier, or the local authority responsible for waste disposal in your area.
VOGUE parts have undergone strict product testing in order to comply with
regulatory standards and specifications set by international, independent, and
federal authorities.
VOGUE products have been approved to carry the following symbol:
All rights reserved. No part of these instructions may be produced or transmitted in any form or by any means, electronic,
mechanical, photocopying, recording or otherwise, without the prior written permission of VOGUE.
Every effort is made to ensure all details are correct at the time of going to press, however, VOGUE reserve the right to
GD232_ML_A5_v2_20201202.indb 5 GD232_ML_A5_v2_20201202.indb 5
Probable Cause
Voltage Power
18W
change specifications without notice.
Solution
Check the unit is plugged in correctly and
switched on
Call VOGUE agent or qualified Technician
Check power supply
Call VOGUE agent or qualified technician
Apply more pressure to the knife
Call VOGUE agent or qualified technician
Dimensions
Weight
h x w x d mm
0.7Kg 220 x 78.5 x 81
UK
5
2020/12/2 13:59 2020/12/2 13:59