Haier DD410RS Guide De L'utilisateur page 11

INSTALLATION INSTRUCTIONS
STEP 3 - INSTALL DUAL-DRAWER REFRIGERATOR (Cont.)
METHOD 1 - INSTALL TO COUNTERTOP (Cont.)
Level the dual-drawer refrigerator
Adjustment of the leveling legs under the dual-drawer may be necessary for
a proper fit in the cabinet opening.
1. Adjust the height of the rear of the dual-drawer by raising or lowering the
rear leveling legs, and then begin to slide the dual-drawer into the under
counter opening.
2. Adjust the front of the dual-drawer, by raising or lowering the leveling
legs, until it fits under the countertop, with enough space to install the
anti-tip bracket to the underside of the countertop.
3. Raise the front leveling legs until the anti-tip bracket is flush with the
underside of the countertop.
4. Using a screw provided, install dual-drawer refrigerator to countertop.
METHOD 2 - INSTALL TO ADJACENT CABINETS
Attach the Anti-Tip Brackets
1. Pry hole covers from the top of the refrigerator cabinet to reveal the holes
used to install the anti-tip brackets.
2. Open the upper drawer and leave it open to install the anti-tip brackets.
3. Remove the anti-tip brackets and screws from the accessory bag.
4. With the screws provided, fasten an anti-tip bracket to each side of the
top of the cabinet.
Level the dual-drawer refrigerator
Adjustment of the leveling legs under the dual-drawer refrigerator may be
necessary for a proper fit in the cabinet opening.
1. Adjust the height of the rear of the dual-drawer by raising or lowering the
rear leveling legs, and then begin to slide the dual-drawer into the under
counter opening.
2. Adjust the front of the dual-drawer, by raising or lowering the leveling
legs, until it fits under the countertop.
3. Install dual-drawer refrigerator to cabinets.
49-60810-1
Right Side Left Side
11