CyberPower Professional Rack Mount LCD Série Manuel D'utilisation page 13

Step 3: Press and hold the display-toggle for 4 seconds. When the icons blink, the value of each item is
changed by slightly pressing the toggle.
Step 4: To save the value and return to general mode, press and hold the toggle for 4 seconds.
Note! If the UPS is left idle for over 30 seconds during setup, it will turn off the backlight and return to
general mode automatically.
Note! If the user does not want to save the new settings and return to the general mode, there are two
methods:
(1) Wait for the backlight to turn off, or,
(2) By pressing and holding the "Display-toggle" key for 10 second.
CYBERPOWER GREENPOWER UPS™ TECHNOLOGY
CyberPower's GreenPower UPS™ Circuit Design is a solution to this problem "Power Loss."
When the Utility Power is operating normally, Green Power UPS™ works in Bypass Mode.
Our GreenPower UPS™ design conducts power only through the Relay and still provides
normal output voltage. Bypassing the transformer reduces power consumption thereby
conserving energy and saving money. When the utility power is abnormal the UPS will
operate under Battery or AVR Mode. Under this condition Green Power UPS™ and a
traditional UPS would operate about the same.
On average utility power operates 88% of the time and the CyberPower GreenPower Technology will work in its
money/ energy saving Bypass Mode.
Copyright © 2015 CyberPower Systems, Inc.
LCD SETUP FUCTIONS
GreenPower UPS™
12