ARIETE Futurmat F3 Mode D'emploi page 15

MACHINES WITH PARTIAL EMOTYING OF THE BOILER:
In the models that incorporate a button for hot water (INFUSIONS), the boiler can be emptied simply and
easily.
To empty the boiler partially, press the "infusions" button (See figure 5) until the LED (luminous indicator)
on the button starts flashing. The water will flow without interruption for 25 seconds (approximately ½ litre of
water) and the boiler will not automatically recover its level. Ten seconds after the emptying cycle has
ended, the boiler automatically recovers its level.
Figure 5
By pressing the "INFUSIONS" button again, 10 seconds after the emptying cycle has ended, until the LED
flashes, a new cycle will be started without water recovery.
By continuing to press the button cyclically, the boiler can be emptied to the reference level of the outflow
pipe (See figure 6).
Work level
Reference level of
the outflow pipe for
the "INFUSIONS" hot
water outlet
Hot water button
12b
Figure 6