Publicité
TECHNICAL DIVISION
4– FIT THE BRACKET FOR THE UPPER
TUBE, IT IS PLACED NEXT TO THE CEILING
AND CENTRED WITH REGARD TO THE
WIDTH OF THE HOOD.
DRILL, FIT WALL PLUGS AS SECURE WITH
THE SUPPLIED SCREWS.
5– CONNECT THE FUME OUTLET TUBE AND
PLUG INTO THE MAINS.
(BEFORE CONNECTING TO THE MAINS, MAKE
SURE THAT THE SOCKET NOT LIVE)
INSTALLATION MANUAL P-960
6–FIT THE EXTERIOR (LOWER) AND THE
INTERIOR (UPPER) TUBES, ONE INSIDE THE
OTHER ABOVE THE HOOD, RAISE THE
UPPER ONE AND SECURE IT TO THE
BRACKET AND SECURE THE EXTERIOR
(LOWER) TUBE TO THE BRACKET NEXT TO
BOX
Publicité
