Thrustmaster T500RS Manuel De L'utilisateur page 16

- Install the MOD fully and tightly into the bottom of the "Metal Stop" cavity.
- For strong resistance: position the MOD against the Upper wall.
- For even stronger resistance: position the MOD against the Lower wall.
Position against the Upper wall
(Resistance of around 14Kg/30.8lbs)
- Once you have done so, tighten the "Metal Stop" (23) at the rear of the pedal arm
Position against the Upper wall
(Resistance of around 14Kg/30.8lbs)
Important note:
To avoid any calibration problems, the "Realistic Brake" MOD must only be
(do not install it in "Medium Run" or "Short Run" position)
installed in "Long Run" position
15/20
Position against the Lower wall
(Resistance of around 16Kg/35.2lbs)
Position against the Lower wall
(Resistance of around 16Kg/35.2lbs)