Driver Installation - Bresser National Geographic 91-31000 Mode D'emploi

Parts
1. Camera shutter
2. Reduce brightness (-)
3. Increase brightness (+)
4. Set light mode/turn light off
5. Focus ring
6. Attachment piece
7. Illuminator (12 LEDs)
8. Lens
9. USB cable
General
This is a digital reflected-light microscope. You hold it in your hand and can place
the bottom section (attachment piece) on all kinds of things in order to look at
them. For example, you can observe leaves, microorganisms, your skin or hair
and much more. The microscope works best when the thing that you're looking at
(also called the 'object') is flat. You can view the enlarged image on your computer
screen, as well as take still pictures and video and save them on your computer.

Driver Installation

Insert the product CD into your PC's CD/DVD drive. The driver installation starts
automatically. Plug the microscope's USB connector (10) into your computer's
USB slot. The lighting (7) turns on and your PC detects the hardware, which is
then installed. Soon, the 'AMCAP' icon appears on the desktop. Now you can use
the microscope.
Live Observation
Press the camera shutter (1). A live image is displayed on the monitor. It will proba-
bly be blurry. Hold the microscope by the casing and place the attachment piece
(6) on an object, like a piece of paper with writing on it. Turn the focus ring (5) to
make the live picture sharper. This is called focusing.
10. USB connector
11. Stand
12. Focusing knob
13. Illuminated table
14. Preparation holders
15. Box with object holder,
glass covers and adhesive labels
16. Battery compartment (stand)
EN
11