Guidelines; Export; Volume And Tone Control - ergoline 3D-SOUND Instructions De Service

Please read and observe ...
Cleaning
Replacing
Clean or replace depending on soiling
See the operating instructions for the tanning
system.
Visual inspection
Filter/filter mat
Continuation of work steps
...
on next page
End of work step

Guidelines

This device was built according to UL STD 482, certified to CAN/CSA
STD C22.2 2 No. 224.
CAUTION – Air inflow and outflow
Do not change, obstruct or block the air inflow and outflow
area to the device or make any unauthorized changes to the
device. The manufacturer shall bear no liability for damage or
injuries resulting from such actions.

Export

We would like to point out that the devices are exclusively intended for
use in the US and Canada, and may not be exported to other countries
and operated there! The manufacturer shall assume no liability whatso-
ever in case of non-observance! We explicitly emphasize that high liabil-
ity risks may occur for the exporter an/or the operator in case of non-
observance.

Volume and tone control

Bass, treble and volume on this system are preset in the factory.
11