Skil LL932301 Guide D'utilisation page 14

When the LED indicator light illuminates red, it indicates that the
•
tool can only be operated for approximately 30 minutes before
turning off automatically.
To Turn the Compact Self-Leveling Cross Line Laser
On and Off
WARNING
protecting your eyes and the eyes of those around you .
Never point the compact self-leveling cross line laser at
anyone's face, including your own .
To turn the compact self-leveling cross line laser on, push the mode
switch in the direction of the unlock icon, or press the laser button
when the mode switch is already in the direction of the lock icon.
If the cross line laser is turned on by the mode switch in the direction of
the unlock icon, push the mode switch in the direction of the lock icon
to turn off. If the cross line laser is turned on with the mode switch in the
direction of the lock icon, press the laser button again to turn off.
Self-Leveling Mode (Fig .3)
Your compact self-leveling cross line laser has two working modes:
self-leveling mode and manual leveling mode.
In self-leveling mode, the tool will level itself if it is within ±4° of
horizontal.
Place the compact self-leveling cross line laser on a flat, smooth
surface that is within ±4° of horizontal.
Turn the tool on by sliding the mode switch in the direction of
the unlock icon. The compact self-leveling cross line laser will
automatically level within 6 seconds.
If the surface on which the compact self-leveling cross line laser is
placed exceeds ±4° from horizontal, the laser line will blink as an
alarm and the LED indicator for leveling status will illuminate in red.
In this event, adjust the angle of the surface slightly.
14
When turning on the compact self-level-
ing cross line laser, always be aware of