Parameter Settings - Bushnell TROMHY CAM Notice D'utilisation

The SETUP Menu – Parameters and
Settings List w/Descriptions
Parameter
Mode
Image Size
(only affects
still photos)
Capture
Number
(only affects
still photos)
Video Size
(only affects
video clips)
Video
Length (only
affects video
clips)
Settings
(Bold=default)
Camera or
Video
5M Pixel,
8M Pixel,
3M Pixel
1 Photo,
2 Photo,
3 Photo
1920x1080
(color model),
1280x720
(monochrome
model),
640x480,
320x240
10S (second)
default, with
60S to1S
possible range
Description
Selects whether still photos or video
clips are captured when the camera is
triggered.
Selects resolution for still photos from
3 to 8 megapixels. Higher resolution
produces better quality photos, but
creates larger files that take up more of
the SD card capacity (fills up faster). 5M
is a good compromise between quality
and file size.
Selects how many photos are taken
in sequence per trigger in Camera
mode. Please also refer to the Interval
parameter.
Selects video resolution (in pixels per
frame). Higher resolution produces
better quality videos, but creates larger
files that take up more of the SD card
capacity (fills up faster). 640x480 is
VGA video in standard 4:3 format. The
highest resolution settings provide
"widescreen" format HD video. Using
high speed SD cards (SanDisk
Ultra or Extreme
®
recommended if you will use an HD
video setting.
Sets length per captured video clip.
Settings begin with 10 second default
when parameter is first selected. After
stepping down to 1S, video length
settings start over at 60S.
®
series or similar) is
®
17