Special Safety Instructions For This Machine; Designated Use; Supplied Parts; Unpacking The Appliance - Profi Cook PC-AE 1000 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
• Children should be supervised at all times in
order to ensure that they do not play with the
device.
Special Safety Instructions for this
Machine
WARNING:
• Risk of cuts! The centrifuge sieve is sharp!
• If the rotating sieve is damaged, the device
shall not be operated.
• Always use the supplied tamper. Do not in-
sert your fingers or tools into the filler opening.
• Do not operate the mixer for more than 3 min-
utes. Afterwards, let it cool for approximately
1 minute before you use it again.
• Do not touch any moving parts of the machine
and always wait for it to stop.
• The machine should only be used under super-
vision!
• Do not manipulate any of the safety switches.
• Do not remove the lid during operation.
• Do not put your fingers into the filler opening.

Designated use

This devices is used for extracting juice from fresh
fruit and vegetables like pineapples, red beet, cel-
ery, apples, cucumbers, carrots, spinach, melons,
tomatoes, pomegranates, and grapes.
As long as peelings are edible, they also can be
processed.
Food containing starch, like bananas, papayas,
avocados, figs, and mangos, as well as especially
hard and fibrous fruit and vegetables, should not
be processed with the device.
NOTE:
Juice extraction from small fruit like for example
berries with the centrifuge principle is difficult.
You should use a suitable berry press for them.
Any other use shall be considered as not intended
use and can lead to material damage or even
personal injury.
32
The manufacturer shall not be liable for damages
caused by not intended use.

Supplied parts

1 base device with motor
1 transparent cover
1 tamper with lid, removable
1 centrifuge sieve
1 centrifuge housing
1 juice container
1 pomace container
1 cleaning brush

Unpacking the appliance

1. Remove the device from its packaging.
2. Remove all packaging materials like foils, filling
materials, cable holders, and carton packag-
ing.
3. Check the scope of deliveries for complete-
ness.
NOTE:
There may still be dust or production remains on
the device. We recommend that you clean the
device as described under "Cleaning".

Description of the Parts

1 Transparent cover
2 Filler opening
3 Tamper
3a Lid
3b Container for accessories
4 Centrifuge sieve
5 Centrifuge housing
6 Juice container
6a Lid
6b Sieve
6c Container
7 Base device with motor
8 Safety handle
9 Drive wheel
10 Pomace container
11 Switch
No illustration: Cleaning brush

Publicité

Table des Matières

Dépannage

loading

Table des Matières