SLIM FIT
HOW TO CUT EPDM GASKET TO AVOID WATER
!
FILTRATION INTO THE CABIN
A- Glue gasket, keeping 100 mm of
protection paper at each side.
B- Remove the two pieces of paper.
C- Glue by pressing both ends.
B
Gasket
Position the unit on the seal, introducing
4
the front in the hatch gap.
Caution! When positioning the unit
above the hatch gap, check that the
wastewater run-offs are not blocked by
the EPDM seal.
Take down the front and set aside the fastening
5
screws.
Gasket
Remove
Air conditioning for vehicles
A
Gasket
100 mm Approx. (protection paper)
C
Gasket
5
17
EN
15 mm
Gasket
Cabin roof
Gasket
4