Nameplate - Riello SP20-DN32 Manuel D'utilisation Et D'entretien

1.9 - Nameplate

• Stuck to the frame plates.
• MANUFACTURING YEAR: Year of manufacture.
• MODEL: Heat exchanger model and product configuration.
• SERIAL No.: Production number, to identify your heat
exchanger.
• DATE: Date of manufacture.
• REF.: Eventual notes and/or different references.
• ALLOWABLE TEMPERATURE MIN. / MAX. (TS):
Minimum and maximum allowable temperatures.
• ALLOWABLE PRESSURE MIN. / MAX. (PS):
Minimum and maximum allowable pressure, in bar.
• TEST PRESSURE (PT): Test pressure, in bar.
• VOLUME: Total capacity of the heat exchan-
ger, in litres.
• PED CLASSIFICATION: Risk category of the
heat exchanger (hazard group and physical
state of the fluid).
• CE MARKING: Only the heat exchangers
classified in PED risk category I, II, III or IV
can be CE marked. The identification number of the Noti-
fied Body will appear near to the CE Mark symbol for heat
exchangers classified in risk category II, III or IV.
• CIRCULATION: 1 indicates the inlet and outlet of the primary
loop. 2 indicates the inlet and outlet of the secondary loop.
• TIGHTENING MEASURE: Minimum and maximum tightening
dimension (d) between the plates, in mm.
• WEIGHT (EMPTY): Empty weight of the heat exchanger,
in kilograms.
ENGLISH
d
EN
37