Lindy 38048 Manuel Utilisateur page 4

User Manual
8. EDID BUTTON: Press this button to select the audio output mode
9. ARC BUTTON: Press this button to select the ARC function
10. RST BUTTON: Press this button to reset back to factory defaults (Input 1, 2.0CH Audio, ARC off)
11. IR IN: Remote control signal receive window
Rear Panel
1. HDMI INPUT: Connect your HDMI source to these ports with HDMI cables
2. HDMI OUTPUT:* Connect your HDTV or monitor to these ports with HDMI cables
3. STEREO OUT:** Connect your switch to an amplifier using a 3.5mm jack cable
4. TOSLINK OUTPUT:** Connect your switch to an amplifier using optical fibre
5. DC IN: Plug the 5V DC power supply into the unit and connect the adapter to an AC wall outlet
* Only port 6 will support MHL input using a passive cable.
** The audio out will always take the audio from the HDMI A output port.
Remote control
Power button: Power the switch on or off
Audio: Pressing this button will toggle the audio output mode,, the front LED will
indicate the current option selected
ARC:*** Press this button to active or deactivate ARC
PiP: When pressing the PiP button, the image on OUTPUT B will mirror the
image on OUTPUT A
Select: Pressing this button will scroll through the PiP source
Enter: Once you have found the PiP source you want to watch, press enter to
show this on the full screen for both OUTPUT A and B
*** To use the ARC function, your TV must support ARC on the TosLink port and
must be connected to output A. When ARC is not selected, the switch will output
the audio from the selected input source.
Application Example
English