Features And Specifications; Battery Installation/Set Up - ThermoPro TP-17 Mode D'emploi

12. Battery Compartment: Hold one AAA battery.
Note: This unit is designed to remotely monitor cooking
progress. Do not remove the probes during cooking. The
internal temperature will be displayed on the unit outside of
EN
the oven.

Features And Specifications

1. Programmable alert with preset temperatures
recommended by USDA for specific foods.
2. Dual stainless-steel probes with steel mesh cable to
measure and monitor temperatures of two pieces of
meat or two sections of the same large piece of meat
simultaneously.
3. BBQ/Oven Hi/Low Temperature monitor and alert to
ensure your BBQ/OVEN temperature is always within
your set range.
4. Temperature range of probe: 14˚F to 572˚F (-10˚C to
300˚C).
5. Temperature tolerance of internal food reading: +/-1.8˚F
(+/-1.0˚C).
6. 99-hour and 59-minute countdown timer and count up
timer.
7. Temperature readings in ˚F or ˚C.
-24-
8. Flip-out counter top stand and magnet.
9. Uses one AAA battery (included).
* If probe is not inserted into food and put directly inside the
oven, the temperature reading of oven heat above 200˚F
(93˚C) will be accurate to within 2˚F to 5˚F (1.1˚C to 2.7˚C).

Battery Installation/Set Up

Slide open the battery compartment door at the back of
the unit.
Insert one (1) AAA battery according to the polarity
markings.
Replace the battery compartment door.
Remove the printed vinyl label from the LCD screen.
Important Notes/Warning
This product is not for use in microwave ovens.
Keep out of reach of children.
Do not touch hot probe or wire with bare hands or just
after cooking. Always wear a heat-resistant glove.
Do not expose probe directly to flame. Doing so will cause
wire to deteriorate.
When not in use, slide the mode selector switch to the
OFF position to conserve the battery.
-25-
EN