Features And Specifications; Battery Installation/Set Up - ThermoPro TP-04 Mode D'emploi

mode.
3. MEM|S/S Button: Press the MEM button while in cook mode to
enable the option to adjust quick temperature settings. Press
again to save selection. Press the S/S button when in timer mode
to begin the count-down timer. Press the S/S button to pause or
restart the timer. When the countdown timer hits 0:00 press the
S/S button to silence the unit.
4. Up Arrow/HR Button: Press the up arrow to select food types
while in quick temperature setting. Press the up arrow to set
your desired cooking temperature while in manual temperature
setting. Press the HR button to set hours while in timer mode.
To clear time, press the HR and MIN buttons at the same time.
5. Down Arrow/ MIN Button: Press the down arrow to select food
types while in quick temperature setting. Press the down arrow
to set your desired cooking temperature while in the manual
temperature setting. Press the MIN button to set minutes while
in timer mode. To clear time, press the HR and MIN buttons at
the same time.
6. F or ˚C Selector: Move the switch towards ˚F or ˚C, depending ˚
on how you would like your temperature displayed.
7. Mode Selector: Move the position of the selector to select
cook mode, timer mode or power off the device.
8. Flip-out Counter Top Stand: Allows user to place device on
counter for easy viewing.
9. Magnet: Allows user to stick device to a metal surface. For example,
a refrigerator.
10. Battery Compartment: Remove battery cover to insert 1
AAA battery.
Note: This unit is designed to remotely monitor cooking progress.
Do not remove the probe during cooking. The internal temperature
will be displayed on the remote unit outside of the oven.
-2-

FEATURES AND SPECIFICATIONS

Programmable alert with preset temperatures for specific
foods.
23-hour, 59-minute countdown timer.
Stainless steel temperature probe with steel mesh cable.
Temperature range of probe: 32˚F to 482˚F (0˚C to 250˚C).
Temperature tolerance of internal food reading: +/-1.8˚F
(+/-1.0˚C).
Temperature readings in ˚F or ˚C.
Flip-out counter top stand and magnet.
Uses one AAA battery (included).

BATTERY INSTALLATION/SET UP

Slide open the battery compartment door at the back of the
unit.
Insert one (1) AAA battery according to the polarity markings.
Replace the battery compartment door.
Remove the printed vinyl label from the LCD screen.
IMPORTANT NOTES/WARNING
This product is not for use in microwave ovens.
Keep out of reach of children.
Do not touch hot probe or wire with bare hands or just after
cooking. Always wear a heat-resistant glove.
Do not expose probe directly to flame. Doing so will cause
wire to deteriorate.
When not in use, slide the mode selector switch to the off
position O to conserve the battery.
Be sure to use a new, good quality alkaline battery and replace
-3-