Important Safeguards - Alpina SF-9355 Mode D'emploi

Dear Customer,
Thank you for choosing this ALPINA home appliance. Your Alpina appliance comes with a 2 year warranty and will provide
years of service if looked after properly. The ALPINA name brings you Quality, Reliability and Dependability. We hope you
will continue to make ALPINA your first choice in home appliances.
When using electrical appliances, basic safety precautions should be followed:
1. Read all instructions carefully.
2. Make sure the power supply corresponds to one on the rating label.
3. To avoid electrical shock, do not immerse electrical parts in water or other liquid.
4. Do not allow children to operate or play with the appliance.
5. Unplug from outlet when not in use, or before putting on/taking off parts.
6. Do not use with damaged electrical cord or plug.
7. If damaged or malfunction occurs, refer to an authorized service center only.
8. Do not place on or near hot surfaces.
9. Never pull the appliance by the power cord.
10. Do not use the appliance for other than intended household use.
Read these instruction carefully
Keep at least 1.5 meters away from the sides, front and back of the heater and away from inflammable materials. Do
not attempt to mount the heater on wall.
Do not cover the heater at any time when operating; check inlets and outlets from time to time for accumulated dust.
Do not use it on the carpet with long fluff.
Close supervision is necessary when the product is used by or near children or invalids.
Do not use the appliance near the vicinity of water, such as bathtubs, washbowls, swimming pools etc. Don't leave the
working heater without supervision.
Do not insert sticks or any other objects to either the air inlet or the outlet of the appliance.
When the appliance is use again after a long period of time not being used, a burn smell will occur due to dust on the
resistances, this is quite normal.
Instruction for use
1. Set the feet – support, turn the heater to "OFF" position before plugging in.
2. The operating temperature is selected by a combination of the heater switches and thermostat. The hot setting will turn
when the heater switches are both on (illuminated) and the thermostat is turned to 'Maximum'.
3. To determine the correct working temperature conditions, turn the heater to 'High' and the thermostat to 'Maximum'.
When the room has reached the required temperature turn the thermostat slowly to the left. The temperature will now
be kept constant.
4. If you want to a lower temperature, select one of the heater switches only and repeat above procedure.
5. The heater is fitted with an automatic cut off in case overheats occurred. If this activates, turn the heater to off position
and unplug. Allow the heater to cool and remove anything that restricts the airflow before using the heater again. If the
automatic cut off operates repeatedly, contact a qualified electrician for advice.
Notes:
The power lamp will turn on if the temperature is below the setting of the thermostat.
For maximum benefit, close windows and doors.
USING THE TURBO
This is operated by means of the switch with the fan symbol along side. The fan will only operate with the thermostat in "on"
position and can be used when the heating elements are "on" to blow warm. For warm conditions the fan can be used with
the heating elements "off" to blow cool air into the room.
Warning:
This appliance is equipped with a grounded, Type G, 3-pin power supply cord. This is a safety feature. Do not attempt to
defeat the safety purpose of this plug.

IMPORTANT SAFEGUARDS

3
ENGLISH