System Setting - Televes DRT 7288 Manuel D'utilisation

User manual
6.- Set PID:
- If you want to set PID (Packet Identifier) manually, select TP in the
"Channel Search Page" and press MENU key on the RCU to display the
command box.
- Then select SET PID command and press OK. The set PID Menú will be
displayed. Enter the correct value and select OK.
7.- Delete CH:
- If you want to delete a Channel, please select the Channel which you
want to delete and then press MENU key on the RCU to display the
command box. Then select Delete CH command. A confirm message
box will be displayed.
Edit Mode: If you want to edit preprogrammed data such as Frequency,
please press EDIT mode key (Red color key) on the RCU to display the
command box. You can then move into those columns to change the value.

6.2.- System Setting

The System Setting Menú allows you to set items depending on your
environment.
1.- OSD Language:
- Lets you select the desired language.
2.- Audio Language:
- Select the desired audio language to be in top priority under the
condition that this language is supported by the channel.
3.- Menú color:
- This option allows you to personalize the color (grass, night, ocean,
wine) of bottom of OSD Menú of its receiver.
4.- Screen Format:
- If your TV supports 16:9 screen format and selected channel provides
16:9 format program, select 16:9.
5.- Video output:
- If your SCART supports RGB control, select RGB. Otherwise select
CVBS.
6.- Start On Channel:
- If you press OK key, then the channel list is displayed. You can select
one channel from the list. The selected channel starts whenever you
turn on DTR 7288.
33
"DTR-7288"