User manual
1.- Safety measures
The Receiver that you have just purchased has been manufactured to meet
international safety standards. We recommend that you carefully read the safety
instructions below.
POWERING:
90 - 240 V~ 50/60 Hz.
OVERLOAD:
Do not overload the mains sockets, extenders or adapters to avoid a fire hazard
or electric shock.
LIQUIDS:
Do not wet or splash the receiver.
Do not place objects or containers with liquids on top of or beside the
equipment.
SMALL OBJECTS:
Avoid placing small metalic objects close to the unit. These could accidentally
enter through the ventilation slots of the Receiver and cause serious damage.
CLEANLINESS:
Unplug the Receiver from the mains before beginning to clean it.
Use a slightly damp, soft cloth (no detergent) to clean the outside of the unit.
VENTILATION:
Place the Receiver in a well-ventilated area so that the slots are not blocked in
any way. Avoid exposure to the sun, to other sources of heat or flames.
Do not place on top of other equipment.
CONNECTIONS:
Only carry out the recommended connections to avoid any possible damage.
TV or VCR CONNECTION:
Switch the Receiver off before connecting or disconnecting it to a TV or VCR.
IF THIS IS NOT DONE, THE TV OR VCR COULD BE DAMAGED.
LOCATION:
The Receiver should be kept inside where it is protected against lightening, rain
and direct sunlight.
Install the Receiver in horizontal position.
WARNING
RISK ELECTRICAL SHOCK
DO NOT OPEN
TO AVOID THE RISK OF AN ELECTRIC SHOCK, DO NOT TAKE THE COVER OFF.
THE RECEIVER CANNOT BE REPAIRED BY THE USER.
PLEASE CONSULT QUALIFIED PERSONNEL ONLY.
This symbol indicates that there is the risk of an electric shock.
This symbol indicates that there are some important instructions for this particular
product.
26
"DTR-7288"
> 50°C
> 80 %
< 5°C