Cleaning The Catalytic Oxygenator; Cleaning The Exhaust Grille - Oreck ProShield Guide D'utilisation

3
1
10

Cleaning the Catalytic Oxygenator

2
1. Unplug the air purifie and lay it on its side with the hinged
cover on top.
2. Open the Top Cover by pressing the Cover Release button.
3. Remove the Pre-Filter and Truman Cell
4. Vacuum the front face of the filter with a soft-brush
attachment only. Do not use liquids to clean.
5. Replace the Truman Cell
6. Close the Top Cover securely.

Cleaning the Exhaust Grille

1. Remove the Cleaning Brush from the storage slot located
under the Top Cover.
2. Brush away debris that has collected between the Grille Slots.
3. Return the Cleaning Brush to the storage slot.
4
.
®
and Pre-Filter.
®
2
1