Oreck ProShield Guide D'utilisation page 11

5
Oreck's
Assail-a-Cell
®
cleaner is an
excellent way to
clean the
Truman Cell .
®
2
5. Spray Oreck Assail-a-Cell
and cover each surface. Allow the cleaner to soak for a few
minutes but do not let it dry. Thoroughly rinse the Truman
Cell with clean water.
®
An alternative method to clean the Truman Cell
or soak it in warm water for loose debris. Mild liquid dish
detergent in water may also be used to help break down
tough dirt and residue. Thoroughly rinse the Truman Cell
with clean water.
Note: To prevent damage to the components of the Truman
Cell , do not put in dishwasher or use a cotton swab.
®
Tough residue such as tar from tobacco smoke may need
additional cleaning or longer soaking.
6. Shake excess water from the Truman Cell
drying time. Do not use heated or compressed air to dry.
7. Place the Truman Cell
straight down into the slots. The Truman Cell
designed so that it can only be inserted in one direction.
8. Close the Top Cover securely.
8
3
cleaner between each Cell Plate
®
back into the unit by sliding it
®
1
7
is to rinse
®
®
to speed up
®
is specially
®