Putting The Lamp Into Place - Robert Juliat 900 SNX Série Mode D'emploi

PUTTING THE LAMP INTO PLACE.

User's precautions :
- Disconnect from the mains.
- Lamp is cold.
- Avoid touching the bulb of the lamp.
HMI 2500.
- Open the lantern's bonnet.
- Open the socket jaws by unscrewing 1 .
- Place the lamp into the socket.
- Retighten the socket jaws by using the knob 1 .
For means of security, each time the lamp is changed, it
is recommended to check the condition of the socket
connections : the base of the lamp - socket jaws. A socket or the
base of a lamp which has become black, requires replacement.
Otherwise, damage will be caused to important parts of the
lantern (i.e. Ignitor).
HMI 1200.
12
robert juliat
Route de Beaumont F 60530 Fresnoy-en-Thellle phone: 33 (0)3.44.26.51.89 - fax: 33 (0)3.44.26.90.79 - www.robertjuliat.fr
DOSSIER TECHNIQUE
HMI PROFILE 1200W & 2500W
WARNING : Fragile lamp - take the lamp out from the
lamp housing, when transporting the lighting unit.
900 SNX
VALID SINCE : 03.06.02
1