Technical Data; General; Mechanical - Videotec ULISSE NETCAM Manuel D'instructions

15 Technical data

The installation is type TNV-1, do not
connect it to SELV circuits.
In order to reduce the risk of fire, only use
cable sizes greater than or equal to 26AWG
(0.13mm²).

15.1 General

Built in aluminium and ABS
Epoxypolyester powder painting, RAL9002 colour
Top mount (OTT)
Transmission through toothed belt
Slip-ring
Electronic limit switches
Plug installation thanks to connector and easy
replacement on-site
Zero backlash
Configuration of telemetry protocol parameters
through dip-switch for RS485

15.2 Mechanical

Cable glands: 3xM16
Horizontal rotation: continuous
Vertical rotation: +90° to -40°
Horizontal speed (variable): from 0.02° up to 100°/s
(from 0.02° up to 40°/s, with LED illuminators)
Tilt speed (variable): from 0.02° up to 40°/s (from 0.02°
up to 30°/s,with LED illuminators)
Internal usable area: see drawings
Enclosure glass window (WxH): 118x75mm (4.6x2.7in)
Preset accuracy: 0.02°
Unit weight: 16.3kg (36lb) (16.8kg (37lb), with LED
illuminators bracket)
ULISSE NETCAM, for thermal cameras:
Germanium glass
- Dimensions (Ø): 70mm (2.8in) (external), 55mm
(2.1in) (internal)
- Thick:2mm (0.07in)
- External scratch-resistant treatment: Hard Carbon
Coating (DLC)
- Internal antireflection treatment
- Spectral range: 7.5μm ÷ 14μm
- Medium transmittance (7.5μm ÷ 11.5μm): 94%
- Medium transmittance (11.5μm ÷ 14μm): 90%
43