Compliance; Description - Kinetec Spectra Manuel D'utilisation

Compliance:

The KINETEC Spectra and Spectra DC (Data Capture) comply with the standards of Directive 93/42/EEC,
and bear the CE mark.
The KINETEC Spectra and Spectra DC (Data Capture) comply with the standards in force (IEC 601.1.2)
concerning the electromagnetic compatibility of medical devices and IEC 60601-1 concerning electrical
safety.
The KINETEC Spectra and Spectra DC (Data Capture) meet the requirements of the Machinery Directive
No. 2006/42/EC.

Description

The KINETEC Spectra and Spectra DC consist of the following components:
1 • Lower limb support.
2 • Thigh support.
3 • Foot support and hand control location for
transport.
4 • Hand control.
5 • Thigh support setting lock.
6 • Lower limb support setting lock.
7 • Foot support positioning setting lock.
8 • Transport handle.
9 • ON/OFF switch and fuses.
10 • Liquid-crystal display
(2 lines of 16 characters).
11 • SESSION TIME display key
12 • BYPASS mode key.
13 • MODULATION key.
14 • WARM UP key.
15 • EXTENSION setting key.
16 • FLEXION setting key.
17 • Increase / decrease keys.
18 • START key.
19 • STOP key.
20 • FORCE key.
21 • SPEED key.
22 • PAUSE key.
23 • TIMER key.
24 • PROGRAM access key.
Display Details:
A • 16-character line, used to display various messages
when starting up the machine, then the type of
movement during operation (Kinetec or Warm UP).
B • 16-character line, used to display various messages
when starting up the machine; then it displays the
operational parameters.
C • 3-character area showing the extension limit.
D • 4-character area showing various messages: RUN,
STOP, EXT, FLEX ...
E • 3-character area showing the real-time angle of the
knee; this value changes in line with the movement.
F • 3-character area showing the flexion limit.
Spectra & Spectra DC
3
7
9
4
10
15
17
18
21
22
EN
1
6
8
12
13
14
11
16
19
23
24
2
5
20
3/16