Yamaha DS2416 Mode D'emploi page 159

DELAY->ER. (delay and early reflections in series)
Parameter
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB.DLY 0.0–1000.0 ms
FB.GAIN –99 to +99%
HI.RATIO 0.1–1.0
1
TYPE
ROOMSIZE 0.1–20.0
LIVENESS 0–10
INI.DLY 0.0–500.0 ms
DIFF. 0–10
DENSITY 0–100%
ER NUM. 1–19
DLY BAL. 0–100%
1. S-Hall (small hall), L-Hall (large hall), Random, Revers (reverse), Plate, Spring
DELAY+REV (delay and reverb in parallel)
Parameter
DELAY L 0.0–1000.0 ms
DELAY R 0.0–1000.0 ms
FB.DLY 0.0–1000.0 ms
FB.GAIN –99 to +99%
DELAYHI 0.1–1.0
REV TIME 0.3–99.0 s
INI.DLY 0.0–500.0 ms
REV HI 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
DLY/REV 0–100%
Range
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
High-frequency feedback ratio
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10
= live)
Initial delay before reverb begins
Reverb diffusion (left–right reverb spread)
Reverb density
Number of early reflections
Delay and early reflected delay balance (100% =
delay only)
Range
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
Delay high-frequency feedback ratio
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Delay and reverb balance (0% = reverb only, 100%
= delay only)
Effects Parameters
Description
Description
161
DS2416