Yamaha DS2416 Mode D'emploi page 158

160
Effects Parameters
REV->PAN (reverb and auto-pan in parallel)
Parameter
REV TIME
INI.DLY
HI.RATIO
DIFF.
DENSITY
HPF
LPF
REV BAL.
FREQ.
DEPTH
DIR.
WAVE
1. L<->R, L—>R, L<—R, Turn L, Turn R
DELAY+ER. (delay and early reflections in parallel)
Parameter
DELAY L
DELAY R
FB.DLY
FB.GAIN
HI.RATIO
TYPE
ROOMSIZE 0.1–20.0
LIVENESS
INI.DLY
DIFF.
DENSITY
ER NUM.
DLY/ER
1. S-Hall (small hall), L-Hall (large hall), Random, Revers (reverse), Plate, Spring
DS2416
Range
0.3–99.0 s
0.0–500.0 ms
0.1–1.0
0–10
0–100%
Thru, 21 Hz–8.0 kHz
50 Hz–16.0 kHz, Thru
Hz
0–100%
0.05–40.00 Hz
0–100%
1
Sine, Tri, Square
Range
0.0–1000.0 ms
0.0–1000.0 ms
0.0–1000.0 ms
–99 to +99%
0.1–1.0
1
0–10
0.0–500.0 ms
0–10
0–100%
1–19
0–100%
Description
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Low-pass filter cutoff frequency
Reverb and panned reverb balance (100% = reverb
only)
Modulation speed
Modulation depth
Panning direction
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave, Square: rectaugular wave)
Description
Left channel delay time
Right channel delay time
Feedback delay time
Feedback gain (plus values for normal-phase feed-
back, minus values for reverse-phase feedback)
High-frequency feedback ratio
Type of early reflection simulation
Reflection spacing
Early reflections decay characteristics (0 = dead, 10
= live)
Initial delay before reverb begins
Reverb diffusion (left–right reverb spread)
Reverb density
Number of early reflections
Delay and early reflections balance (0% = early
reflections only, 100% = delay only)