Yamaha DS2416 Mode D'emploi page 157

REV+SYMPHO. (reverb and symphonic in parallel)
Parameter
REV TIME 0.3–99.0 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
REV/SYM 0–100%
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
MOD.DLY 0.0–500.0 ms
WAVE Sine, Tri
REV->SYMPHO. (reverb and symphonic in series)
Parameter
REV TIME 0.3–99.0 s
INI.DLY 0.0–500.0 ms
HI.RATIO 0.1–1.0
DIFF. 0–10
DENSITY 0–100%
HPF Thru, 21 Hz–8.0 kHz
LPF 50 Hz–16.0 kHz, Thru Low-pass filter cutoff frequency
REV BAL. 0–100%
FREQ. 0.05–40.00 Hz
DEPTH 0–100%
MOD.DLY 0.0–500.0 ms
WAVE Sine, Tri
Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Reverb and symphonic balance (0% = symphonic
only, 100% = reverb only)
Modulation speed
Modulation depth
Modulation delay time
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave)
Range
Reverb time
Initial delay before reverb begins
High-frequency reverb time ratio
Reverb diffusion (left–right reverb spread)
Reverb density
High-pass filter cutoff frequency
Reverb and symphonic reverb balance (100% =
reverb only)
Modulation speed
Modulation depth
Modulation delay time
Modulation waveform (Sine: sine wave, Tri: trian-
gular wave)
Effects Parameters
Description
Description
159
DS2416