Sony SRS-GU10iP Mode D'emploi page 12

* The iPod cannot be operated while the INPUT indicator is on.
** See the user's guide of your iPod for information on the operation of the button.
Notes
• Depending on the connected iPod, operations may differ.
• The iPhone rings as the ring volume set on the iPhone even when it is connected to
the unit. Adjust the ring volume to the appropriate setting on the iPhone.
• When the iPhone is connected to the unit and you receive a call during playback,
playback will pause and you can take an incoming call.
• The volume (except for the iPhone ring volume) cannot be adjusted using the
volume control on the iPod when it is connected to the unit.
• Some popping noise may occur when turning on the iPod.
Turn on the iPod and the unit, and then place the iPod in the unit.
• Loud sound may come out suddenly, depending on the volume settings of each.
To use the unit as a battery charger
Plug the AC cord into the mains. And put the iPod into the main unit's
connector. Battery charging starts automatically. The charging conditions
appear in the iPod display. For details, see the user's guide of your iPod.
When you press POWER to turn off the unit, the display of the connected
iPod is also turned off. However, the iPod will not be locked in that
condition and information stored in the iPod may be viewed by other
people.
To remove the Dock adapter for iPod
To remove the Dock
adapter for iPod, pull it
up with your fingernail or
a flat object using the
slot inside the adapter.
US
12