Elem Garden Technic TDTPL41HP35P Manuel D'utilisation page 32

6-OPERATION
Before using the machine you must read the Engine instruction book.
Engine delivered without oil: add 0.25liter of oil before starting the
engine.
Blade is in action as soon as engine started. While the machine is working maintain the
security handle (3) in working position. The engine will stop as soon as you release the engine
control bar.
6.1 The regulation method of throttle control cable:
On the brake stand of flameout，there are switch of flameout, if the cable is elongates, make
throttle control (3) against the superior handle, rocker of brake can't touch the switch of
flameout, spark plug do not create spark, engine can't run. This time, you need regulate the
cable.
The method is as follows
Method 1：
1） Dismantle throttle control, and Dismantle the top of cable, then use spanner
Loosen the nut of regulate the screw; Fig 6.1-1
2） Revolve the regulate the screw to make the plastics set lengthen, then will avoid
the length of cable that has lengthen out.; Fig 6.1-2
3） After regulation, fix the cable into the throttle control, (Simple method to put the
throttle control into superior handle easy.): put right end of the throttle control into the
superior handle first, then put the other end of throttle control into the superior
handle.). Fig 6.1-3
4） Tension the throttle control (3) to against the superior handle, this time, the angle
of rocker of brake to cover is 90° (or the distance of brake stand to rocker of brake is 1-
2mm, otherwise, if it is no distance, the cable will break off.), Fig 6.1-4
5） Use spanner screw down the nut after regulation; Fig 6.1-5
6） Contrarily, Repeat the method above, as far as the spark plug create spark..