Connecting The Camcorder To Tv - AIPTEK AHD200 Mode D'emploi

Connecting the camcorder to TV

Please follow the below instructions to connect your camcorder and
TV via accessory AV cables for real-time display. You can display your
video clips and still pictures on your TV, sharing them with your friends
and family.
Connecting the camcorder to HDTV
HD TV hereby means the HDTV built-in component input ports, thus can perform
HD (720P) high resolution quality while connected.
1. Turn on your HD TV.
2. Turn on the Camcorder.
3. Plug one end of the component video cable into the (Component
Video IN) port on the HDTV and the other end into the (HD OUT) port
on Camcorder.
4. Plug one end of the other AV cable into the (Component Audio IN) port
on the HDTV and the other end into the (AV OUT) port on Camcorder.
(Please do not plug in the yellow connector to HDTV's AV-IN.)
5. Press the input switch mode on HD TV and select "Component Input".
If you record an HD resolution clip while connected to your HD TV, the TV
display video resolution will down size to D1 (480P) resolution due to data
bit rate, but the recorded file will remain HD (720P) with no change.
When connecting to TV, the Zoom function is not available.
12
Component Video in
(red)
(white)
AV OUT
(yellow)
<AV cable>
HD OUT
(Do not plug in Yellow Cable)
<Component Video cable>
HD TV
Component Audio in
(green)
(blue)
(red)