Function And Features; Operating And Display Elements - IFM Electronic ASinterface AC5210 Notice De Montage

Function and features

• maximum number of modules per master: 31 (2 independent A/B
slaves per module)
• AS-interface version 3.0, downward compatible

Operating and display elements

LED PWR
addressing interface
LED FAULT
labels
8 M12 sockets
LED
Montage
Notes on mounting from page 11.
Note
In the AS-i network the module functions as two independent A/B slaves.
Addressing
The address for the two slaves is set to 0 at the factory.
Addressing with the addressing unit AC1144
When mounted and wired the module can be addressed with the
addressing cable (E70213) via the implemented addressing interface.
In the factory setting, initially only the first slave gives a signal on
address 0. It can be addressed to any address between 1A...31B. Once
this slave is addressed, the second slave is automatically indicated on
the display of the AC1144 with address 0 and can then also be addres-
sed to any address between 1A...31B.
5