4. Clean the appliance and the interior accessories with a cloth and luke-
warm water with a little bicarbonate of soda added (5ml to 0,5 litres
of water).
5. After cleaning wipe with fresh water and rub dry.
6. Check the water drain hole on the
rear wall of the fridge.
Clear a blocked drain hole with the
aid of the green peg in the pack of
accessories included with the appli-
ance.
7. After everything is dry
appliance back on.
Energy Saving Tips
• Do not install the appliance near cookers, radiators or other sources
of warmth. High ambient temperatures cause longer, more frequent
operation of the compressor.
• Ensure sufficient air circulation and exhaust at the appliance base
and at the back wall of the appliance. Never cover air vent openings.
• Do not place warm foods into the appliance. Allow warm foods to
cool first.
• Only leave
the door open as long as necessary.
• Do not set temperature any colder than necessary.
switch the
41