System Requirements; Software Installation - Bushnell INSTANT REPLAY Mode D'emploi

System Requirements

OS: Windows® 98SE/2000/ME/XP/Vista (see note under "Software Installation" regarding Vista)
CPU: Intel 350 MHz w/MMX, AMD 50 MHz, or equivalent processors
Memory: 6 MB minimum
Available Hard Drive Space: 30 MB(if installing BlazePhoto)
Driver: only required for Windows 98SE, provided on CD-ROM or via download (bushnell.com)
Available USB Port
Note: for BlazePhoto tech support, email "support@Blazevideo.com"

Software Installation

If you are using Windows 98SE, you must install drivers before connecting the camera to your PC. Insert the CD-
ROM into your computer's CD drive; it will auto-run and the install screen will be displayed. Select "Install Driver",
then follow the directions. After installation, restart your computer. Windows 2000, ME, XP and Vista do not re-
quire drivers, as the camera uses the USB mass storage standard , allowing the photo files to be accessed as if they were
stored on an external hard drive. For any Windows OS, if you are not already using photo editing software you prefer,
you may install BlazePhoto® from the CD-ROM. Note: With Windows Vista, you may encounter error or warning mes-
sages ("file missing", etc) during installation, but clicking "OK" and proceeding should allow the installation to complete.
Transferring The Photos & Videos to Your PC - Step by Step
1. Be sure the driver has been installed first if you are on Windows 98SE.
2. With the camera's power on, press the "View"button to enter Review/Playback mode. Connect the supplied cable
to the Instant Replay's USB port, then directly to a main USB port on your computer-do not use front panel/key-
board USB ports or unpowered "hubs".
20
118325 Compact Instant Replay 6L20 20 6/4/07 12:56:28 PM