Function "Keep Warm; Automatic Cooking; Pause Function - F.Bertazzoni P905INE Notice D'utilisation

Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

Function "keep warm"

This function of maintenance to the heat makes it possible to reach and maintain
automatically a temperature of 45 or 70°C.
This will avoid liquids over spillage and the food to attach at the bottom of the pan.
You must initially engage the cooking surface, then the zone of heating:
To engage, to start the function " keep warm
Action
To engage
Select the desired heating zone press key [ + ] or [ - ]
To stop
This function can be started independently on all the heating zone.
When the pan leaves the zone of cooking the "keep warm" function remains active during
approximately 10 minutes.
The maximum duration of maintenance to the heat is 2 hours.

Automatic cooking

All the cooking zones are equipped with an automatic "go and stop" cooking device. The
cooking zone starts at full power during a certain time, then reduces automatically its power
on the preselected level.
Switching on the automatic cooking
Action
Zone selection
Full power setting
Automatic cooking
Power level selection
(for example « 7 »)
Switching off the automatic cooking
Action
To stop the function

Pause function

This function brakes all the hob's cooking activity and allows restarting with the same settings.
Start up / Stop the pause function
Action
Engage pause
Stop the pause
Control panel
press key [
]
one time for 45°C
press key [
]
two time for 70°C
press key [ + ] or [ - ]
Control panel
press on key [ + ]
press on key [ + ]
press on key [ + ]
press on key [ - ]
Control panel
press the zone key [ - ]
and [ + ] simultaneously
Control panel
press key [ II ]
press key [ II ]
and press any key [ - ] or [+ ]
9
Display
keep warm control
light is lighting
keep warm control
light is blinking
[
] or [ U ]
U
[ 0 ] to [ 9 ]
Display
[ 4 ]
[ 4 ] to [ 9 ]
[ 9 ] is blinking with [ A ]
[ 9 ] [ 8 ] [ 7 ] ... [ 1 ]
[ 7 ] is blinking with [ A ]
Display
[ 0 ]
Display
displays [ II ] in the
heating zone displays
pause control light is
blinking.

Publicité

Table des Matières
loading

Table des Matières