Ventilation; Starting-Up And Appliance Management; Before The First Use; Induction Principle - F.Bertazzoni P905INE Notice D'utilisation

Ventilation

The cooling system is fully automatic. The cooling fan starts with a low speed when the
calories brought out by the electronic system reach a certain level. The ventilation starts his
high speed when the hob is intensively used. The cooling fan reduces his speed and stops
automatically when the electronic circuit is cooled enough.

STARTING-UP AND APPLIANCE MANAGEMENT

Before the first use

Clean your hob with a damp cloth, and then dry the surface thoroughly. Do not use detergent
which risks causing blue-tinted colour on the glass surface.

Induction principle

An induction coil is located under each heating zone. When it is engaged, it produces a
variable electromagnetic field which produces inductive currents in the ferromagnetic bottom
plate of the pan. The result is a heating-up of the pan located on the heating zone.
Of course the pan has to be adapted:
 All ferromagnetics pans are recommended (please verify it thanks a little magnet): cast
iron and steel pans, enamelled pans, stainless-steel pans with ferromagnetic
bottoms...

Are excluded: cupper, pure stainless-steel, aluminium, glass, wood, ceramic,
stoneware,...
The induction heating zone adapts automatically the size of the pan. With a too small
diameter the pans don't work. This diameter is varying in function of the heating zone
diameter.
If the pan is not adapted to the induction hob the display will show [ U ].

Starting-up


Start-up/ switch off the hob
Action
To start
To stop

Start-up/ switch off a heating zone
Action
Increase power
Decrease power
Stop
If no action is made within 10 second the electronics returns in waiting position.
Control panel
touch the key [ ]
touch the key [ ]
Control panel
touch key [ + ]
touch key [ - ]
touch simultaneous [ + ] and [ - ]
or touch key [ - ]
6
Display
[ 0 ]
nothing or [ H ]
Display
[ 4 ] to [ 9 ]
[ 9 ] to [ 1 ]
[ 0 ] or [ H ]