Timer - F.Bertazzoni P905INE Notice D'utilisation

Timer

The timer is able to be used simultaneous with all 5 heating zones and this with different time
settings (from 0 to 99 minutes) for each heating zone.

Setting and modification of the "Egg Timer"
The "Egg Timer" is independent from the heating zones. If this timer is on and you stops the
hob, the "Egg Timer" will continue until the end of the time.
Action
To start:
To select the "Egg Timer"
Decrease the time
Increase the time
When the time reaches [ 00 ] it is blinking and beeping.

To stop the "Egg Timer"
Action
To select the "Egg Timer"
To stop the "Egg Timer"

Setting and modification of the cooking time of a heating zone
Action
To select a heating zone
To select the power level
To select the « Timer »
Decrease the time
Increase the time
The time is configured and the cooking starts until the time reaches [ 00 ].

To stop the cooking time of a heating zone
Action
To stop the « Timer »
If several timers are activated repeat the process.

Automatic stop at the end of the cooking time
As soon as the selected cooking time is finished the timer displays blinking [ 00 ] and a sound
rings and the heating zone stops.
To stop the sound and the blinking it is enough to press a key.
Control panel
touch the key [ ]
press once on timer key
[ T - ] and [ T + ] simultaneously
press on timer key [ T - ]
press on timer key [ T + ]
Control panel
press once on timer key
[ T - ] and [ T + ] simultaneously
press on timer key [ T - ]
press second time on
timer key [ T - ]
Control panel
press on key [ + ]
press on key [ + ] or [ - ]
press on timer key [ T - ] and [ T + ]
simultaneously until the
desired heating zone.
press on timer key [ T - ]
press on timer key [ T + ]
Control panel
press on timer key [ T + ] and [ T - ]
Simultaneously until the desired
heating zone
press on timer key [ T - ]
press second time on timer key [ T - ]
8
Display
[ 0 ]
[ 00 ]
[30] went to 29,28,27,
the time increases...
Display
the time displays
displays [ 01 ]
displays [ 00 ]
Display
[ 4 ]
[ 1 ]...[ 9 ]
timer control light
from the desired
heating zone is on
[ 30 ] went to
29,28,27,
the time increases...
Display
The time displays
displays [01]
displays [00]