Cooking Advices; Pan Quality; Pan Dimension - F.Bertazzoni P905INE Notice D'utilisation

COOKING ADVICES

Pan quality

Adapted materials: steel, enamelled steel, cast iron, ferromagnetique stainless-steel,
Not adapted materials: aluminium and stainless-steel without ferromagnetique bottom,
The manufacturers specify if their products are compatible induction.
To check if pans are compatibles:

Put a little water in a pan placed on an induction heating zone set at level [ 9 ].This
water must heat in a few seconds.

A magnet stucks on the bottom of the pan.
Certain pans can make noise when they are placed on an induction cooking zone. This noise
doesn't mean any failure on the appliance and doesn't influence the cooking operating.

Pan dimension

The cooking zones are, until a certain limit, automatically adapted to the diameter of the pan.
However the bottom of this pan must have a minimum of diameter according to the
corresponding cooking zone.
To obtain the best efficiency of your hob, please place the pan well in the center of the cooking zone.
aluminium with ferromagnetique bottom.
cupper, brass, glass, ceramic, porcelain.
11