Led Display; Io-Link Interface - Balluff BCM R15E-00 Série Notice D'utilisation

BCM R15E-00 _ -DI00-_ _ , _-S4
Condition Monitoring Sensor
3
Construction and function (continued)
3.2

LED display

The operating status of the BCM is indicated by LEDs.
green LED
Fig. 3-2: Positions of the LEDs
LED
Color State
Green On
Inverse flashing
(1 Hz), t :t = 9:1
on off
Alternating flashing
4 Hz/2 Hz
Orange Flashing
1)
(2 Hz, 10 s)
Tab. 3-1: LED display
The display duration for an event triggering is
extended by 10 s if a further event is triggered
during that time.
The Ping function makes it possible to identify the BCM via
an optical signal after it is connected to an IO-Link master.
only for the BCM R15E-002-DI00-_ _ , _-S4
1)
8 english
orange LED
1)
Operating state
IO-Link communication
inactive
IO-Link communication
active
Ping function active
Event triggered
3.3

IO-Link interface

– Configurable process data for the output of four
differently measured or pre-processed variables and
status bits that contain aggregated information from all
modules.
– Extensive configuration options for the evaluation
variables calculated internally by the sensor.
– Parameterization options for threshold monitoring in
order to transmit the system status by means of
IO-Link events or status bits.
– Self-awareness functions for status monitoring of the
sensor.
The IO-Link interface is described in Section IO-Link
interface from page 19.