Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
GB
Dear Client,
We thank you for having chosen one of our products, the fruit of technological experience
and of continual research for a superior quality product in terms of safety, dependability,
and service.
• Incorrect installation, incorrectly performed maintenance, improper use of the product
the work area to avoid
release the manufacturer from every eventual damage derived from the use of the
stove.
ruct the slits placed on
• The unit cannot be used as an incinerator. Do not use fuels other than pellets.
• This manual has been realized by the manufacturer and constitutes an integral part
of the product and must remain with it during its entire lifetime. If the product is sold
works of art.
or transferred, be sure that the booklet is present since the information contained in
it are addressed to the buyer, and to all those persons of various titles who complete
t.
the installation, use and maintenance.
n have negative effects
• Carefully read the instructions and the technical information contained in this manual,
before proceeding with the installation, use, and any operation on the product.
• The observance of the indications contained in the present manual guarantees the
in the room.
safety of people and the product, the economy of use and a longer functioning life-
time.
ent possibilities of elec-
• Although the carefully studied design and the risk analysis done by our company has
permitted the realization of a safe product, in any case, before effecting any operation
on the stove, it is recommended to keep said manual available and pay scrupulous
lower screen will read
attention to the instructions written therein.
g and ordinary mainte-
• Be very careful when moving the ceramic details where present.
• The wall where the product will be placed must not be constructed in wood, or in any
long periods of time.
safety distance.
• While the stove is in operation, several parts of the stove (door, handle, sides) can
reach high temperatures. Therefore pay attention and use the proper precautions,
above all in the presence of children, elderly or disabled persons, and animals.
• Assembly must be performed by qualified personnel.
environments that are ad-
• Diagrams and drawings are furnished for the purpose of illustration; the manufacturer,
on.
with the intent of pursuing a policy of constant development and renewal of the product
connect devices different
• When the stove is working at its maximum speed, it is strongly suggested to wear
r electrical system usage
gloves while handling with the door for pellets loading and the door handle.
• Installation is not recommended in a bedroom.
ch collects solid material
ance to the ue so that it
Never cover the body of the stove in any way or obstruct the ope-
nings placed on the upper side when the device is operating. All our
stoves are trial lighted on the construction line.
1.0 Norms and declarations of conformity
• Our company declares that the stove conforms to the following norms for EC European
Directive marking.
• 2004/108 EC (EMC directive) and successive amendments.
• 2006/95 EC (low voltage directive) and successive amendments.
• Regulation of the CPR (EU 305/2011).
chnician installing the hydrothermal sanitary system will issue the declaration of con-
formity according to L. 37/2008. The installation of appliance has to be in accordance
with local and national laws and with European norms.
• EN 55014-1; EN 55014-2; EN 61000-3-2; EN 61000-3-3; EN 60335-1;
EN 60335-2-102; EN 62233; EN 14785; EN 50581.
1.1 Safety Information
Please carefully read this use and maintenance manual before installing and operating
the stove!
• The pellet stove must only be operated in living environments. This stove, being con-
trolled by an electronic board, permits a completely automatic and controlled combu-
stion; the exchange, in fact, regulates the lighting phase, 5 power levels and the shut
down stage, guaranteeing the safe operation of the stove.
• The basket used for combustion allows most of the ash produced by the combustion
of the pellets to fall into the collection compartment. Nevertheless, check the basket
daily, given that not all pellets have high quality standards (use only quality pellets re-
commended by the manufacturer).
Instructions
• The glass is equipped with a special circulation of air for self-cleaning, but still, it is
not possible, after several hours of operation, to keep a light grey patina from forming
on the glass. This also depends on the type of pellets used. Some pellets deposit more
ash than others.
1.2 Responsibility
With the delivery of the present manual, we decline all responsibility, both civil and penal,
for accidents deriving from the partial or total lack of observance of the instructions con-
tained herein. We decline every responsibility derived from improper use of the stove,
use of replacement parts that are not original for this model.
The manufacturer declines every civil or penal, direct or indirect responsibility due to:
• Lack of maintenance;
• Failure to observe the instructions contained in the manual;
• Use in non-conformity with the safety directives;
• Installation in non-conformity with the norms in force in the country;
• Use of non-original replacement parts;
• Exceptional events.
• The stove must only be fed with quality 6mm diameter pellets of
the type recommended by the manufacturer;
• Before making the electrical connection of the stove the discharge
• The protective grill placed inside the pellet container must never
be removed;
cient exchange of air;
• Never open the door of the stove while it is operating;
• When the stove is operating, the surfaces, glass, handle and tubes
become very hot: during operation do not touch these parts wi-
thout adequate protection;
• Keep/store the pellets in a cool dry place;
2.0 Stove Panel and remote control
5
AL
+
-
1
2
1
1) Temperature / working power decrease: Using the key on the menu Set tempera-
ture, you can decrease the temperature from a max. value of 40°C to a min. value of
-
7°C. With the key on the menu Set power, you can decrease the working power from
a max. value of 5 to a min. value of 1.
2) Temperature / working power increase: Using the key on the menu Set tempe-
rature, you can increase the temperature from a min. value of 7°C to a max. value
of 40°C. With the key on the menu Set power, you can increase the working power
from a min. value of 1 to a max. value of 5.
3) Key On/Off: Keep the key pressed for 2 seconds to switch the stove on or off.
4) LED ON/OFF: This led indicates the different phases of the stove:
- it is on if the stove is switched on and working
- it is off if the stove is switched off
- it blinks if the stove is switching off
5) LED AL F: The led blinks in the event of a malfunction or alarm.
6) LED chrono-thermostat: This means the automatic single or daily programming of
the switching on or off of the stove is on. The automatic programming can be set
with the remote control (optional) or with the control board.
7) LED temperature ok: This is on when the stove reaches the set temperature. In this
case you will read the word "Eco" and the set temperature on the display.
8) LED pellets loading: This led blinks every time the stove is loading pellets.
9) LED resistance: This led is on only while the stove is lighting up in order to indicate
10) Display LED 7 segments: On the display you can read the different working fun-
ctions of the stove, the room temperature and the set working power. In the event
of a malfunction, the display shows the relative error codes (see paragraph on alarm
codes).
15
14
6
10
8
4
7
9
3
4
2
8
11
10
AL
+
GB
Publicité
Table des Matières
