Bergstrom SLIM FIT Manuel De L'utilisateur page 8

SLIM FIT
EN
Thank you for acquiring and trusting our products range. Slim Fit is an Air Conditioning
equipment designed and made by Bergstrom to be used with vehicle´s engine off,
during resting periods under the shade and/or at night. The only maintenance that is
required is a periodical cleaning of the condenser, at least once a year (1).
Slim Fit is designed with the most advanced technology to achieve an efficient output,
a reduction in energy expenses and CO
characteristics which make it unique on the market of Air Conditioning for vehicles.
If the temperature inside your vehicle cabin is too high for you to rest, cool down cabin
with vehicle Air Conditioning during a few minutes, then connect Slim Fit to maintain
comfort temperature.
If you have any doubt, please consult your dealer or directly Bergstrom.
Do not forget to ask your dealer for your warranty card.
!
!
(1) To carry out this operation, it is necessary to dismantle upper plastic cover of equipment (9
sheet thread screws) and blow using compressed air. We advise this operation should be
carried out by a Service authorised by Bergstrom.
RECOMMENDATION:
For optimal operation of the unit, it is recommended to
start it up occasionally during the winter months in order
to prevent the joints from deteriorating.
NOTE:
If, during assembly, the unit becomes slanted or the
cabin drops with the unit mounted, wait for at least 60
minutes from the moment the unit is horizontal before
starting up.
emissions to the atmosphere. These are the
2
8