Bergstrom SLIM FIT Manuel De L'utilisateur page 11

SLIM FIT
Function F4 - Automatic unit operation
Selecting F4 allows the user to choose the comfort temperature 15ºC to 27ºC (59ºF to
71ºF), which will be selected from the control panel
. When selecting, the display will switch between CA and the degrees selected.
With this function the unit automatically regulates and controls comfort temperature by
acting on the compressors and fan speed. Pressing the remote control key
function F4 and moves to F0 (Manual Function). The unit runs initially in F4 with the
default parameters.
Function F6 - ºF Selection
To activate this function, keep the On/Off
F6 , and then release the key to directly enable ºF. To return to ºC, keep the control panel
-
key pressed down with the unit switched off, at which point C , will flash; when it
stops flashing, press the control panel
carrying out this operation, meaning it must be activated again once finished.
-
+
key pressed down until the display shows
+ key. The remote control is disabled when
11
or the remote control
EN
cancels