Memory Function - Pando PHC9300 Mode D'emploi

EN
Special Functions

Memory function

Define and store a memory
1. With the Function Selector (1), Select
one of the Basic functions.
2. Set the desired parameters with the
Rotating Knob (7)
3. Press the Clock key (5) for 5 seconds.
The memory symbol "M1" starts blinking.
4. With the Rotating Knob (7) select in
which memory you want to store the
defined parameters (M1, M2 or M3)
5. Press the OK Key (4) to confirm and store
the memory.
19
Recalling a memorized function
1. Rotate the function Selector (1) to select
the stored memory.
2. Press the Start key (3). The oven will start
to operate.
Delete a memory
:
1. With the oven in stand-by select the
desired memory by turning the Function
Selector (1).
2. Press the Clock key (5) for 3 seconds.
The power/weight display shows the
DEL"
message "
for 3 seconds.