REMOTE CONTROLS
Replacing the lithium battery of remote control unit.
When the range of the operation of the card remote control becomes short or no functions
while operating. Replace the battery with a new lithium battery. Make sure the battery Polarity
replacement is correct.
1. Pull out the battery holder while pressing the stopper.
2. Insert the button-type battery with the stamped(+) mark facing upward.
Insert the battery holder into the remote control.
WARNING:
Store the battery in place where children cannot reach. If a child accidentally swallowed the
battery, consult a doctor immediately.
Do not recharge, short, disassemble or heat the battery or dispose it in a fire. Doing this may
cause the battery to give off heat, crack or start a fire.
Do not leave the battery with other metallic materials or poke the battery with tweezers or
similar tools.
When throwing away or saving the battery, wrap it in tape and insulate.
(CR 2025)
113