Connecting The Hoses (Fig.3) - WAGNER WallPerfect Flexio 995 Mode D'emploi

WallPerfect Flexio 995 WallPerfect Flexio 995
11.
Connecting the hoses
.3)
(fig
•
Insert the control hose (1) into the grab
handle (2).
•
Insert the thin end of the black air hose
(3) into the grab handle (2) (watch out
for marking) and fix it into position by
turning it to the right.
•
Insert the thick end of the air hose (3) into
the air-hose connection (4) on the basic
device (watch out for marking) and fix it
into position by turning it to the right.
•
Connect the material hose (5) to the
material hose connection socket (6) and
secure with securing clip.
•
Connect the control hose (1) to the
control hose connection socket (7).
•
Connect the suction hose (8) to the
suction hose connection socket (9)and
secure with securing clip.
•
Plug the attachment clip on the suction
hose (10) to the edge of the paint
container.
•
Push the suction hose down to the base
of the paint container.
Do not push the hose too far into
i
the paint container, as it might
otherwise bend upwards and suck
in air.

2
3
3
8
9
6
10
GB D
1
4
7
1
5
41 41