Panasonic CF-VDW07CH Mode D'emploi page 37

MeiWDS Setup Utility
NOTE
The MeiWDS and the wireless display cannot simultaneously make settings.
Set the AES Key setting after setting the wireless display. (
When selecting
[Password] and [Exit MeiWDS] are enabled when adding the check mark for [Enable
tray menu] in the MeiWDS Setup Utility.
·Password
·About MeiWDS : The software version and copyright are displayed.
·Exit MeiWDS : Exit the program.
1 Select [MeiWDS Setup Utility] in the following proce-
dure.
Windows XP
[start] - [All Programs] - [Panasonic] - [MeiWDS Setup
Utility]
Windows 2000
[Start] - [Programs] - [Panasonic] - [MeiWDS Setup Utility]
2 Enter the Supervisor Password, then select [OK].
In the default setting, the Supervisor Password is set to
"supervisor".
3 Set the password and AES Encryption settings, then se-
lect [Next].
If the setting between the computer and wireless dis-
play does not confirm (e.g., the display has changed to
another one.), set it again in the following procedure.
Set AES Key Length.
<When setting AES Encryption to something other than
[Disable]>
Select [AES Key], and set the AES Key(s) using phrase
or binary, then select [OK].
Set AES Key Lifetime.
4 On the confirmation screen, select [Finish].
On the confirmation screen, select [OK] and then restart
the computer.
on the taskbar, the menu is displayed.
: Set the same password as that is set in [Option] menu.
page 35)
E
37