Intended Use; Technical Description - Dometic WAECO PerfectView CAM33C Notice De Montage Et D'utilisation

_CAM33.book Seite 36 Freitag, 20. Mai 2011 11:40 11

Intended use

4 Intended use
The cameras CAM33C (item no. RV-33-TCFM), CAM33C1 (item no.
RV-33-TCFMS), CAM33C2 (item no. RV-33-TCFM-KIT) and CAM33C3
(item-no. RV-33-TCFMS-KIT) are designed mainly for use in vehicles. They
can be used in rear view video systems to observe the space behind the ve-
hicle from the driver's seat when manoeuvring or parking, for example.
!
WARNING!
Since rear view systems are designed merely as an additional aid
for reversing, they do not relieve you of the duty to take proper
care when reversing.
5

Technical description

The camera with integrated microphone, which is encased in an aluminium
housing, transmits image and sound to a monitor via a cable. It has a close-
up lens and a long-distance lens.
The long-distance lens shows the space behind the vehicle as if you were
looking through a rear window. You can switch it on when you are not
reversing.
The close-up lens (reversing camera) is a wide-angle lens, which shows the
area directly behind the vehicle. It is activated when you engage reverse
gear.
Cameras CAM33C1 and CAM33C3 are equipped with a motorised cover for
protection against dirt.
I
NOTE
The cameras were equipped with a reverse display at the factory.
Any monitor that is connected therefore needs a normal picture
function.
36
PerfectView CAM33
EN