dirna Bergstrom bycool blue line SCANIA NTG FLAT Instructions De Montage page 27

FLAT
26
Place cap on tank. Cut at 100mm, insert "T" and
connect to it smaller section hose, marked with
white tape Y (check that curve radius is enough
to avoid stranglings).
27
Connect wiring with sheath to evaporative cooler
boxes and water inlet hose.
A. Connect impulsion hose coming from
evaporative cooler to pump.
B. Connect pump wiring and level wiring.
28 WASTEWATER PIPE
Assemble the wastewater pipe avoiding any
constrictions, to ensure the water enters the tank
correctly.
A
27
EN
®
B