Publicité
Les langues disponibles
Les langues disponibles
Note: If you would like to take out more than one consecutive
segment
6
Connect the watch strap together again by joining the loose
segments
arrow into the adjacent segments
˜ How to exchange the pin inside the slider
(Fig. D, E, F)
Take out the slider
pin
inside.
9
You will need pliers to carefully remove the old pin from the slider.
Insert the spare pin carefully into the slider by again using the
pliers. The new pin is installed.
˜ Cleaning and maintenance
Clean the product on the outside only with a soft, dry cloth.
˜ Disposal
The packaging is made entirely of recyclable materials,
which you may dispose of at local recycling facilities.
The Green Dot is not valid for Germany.
16 GB/IE
, it is sufficient to remove the two outer pins.
with a pin. Press this pin against the direction of the
6
, open the bottom cover
8
.
6
with the spare
10
Publicité
